Part Number : NDXG

Proprietary high power POE 10G Injector

PCBA Model : BTJ-2000

Only PCBA Board

Introduction

The Proprietary passive high power POE 10G Injector is compliant with IEEE 802.3af/at and 802.3bt power level. With latest High Power Hardware design through 4Pair UTP Ethernet Cable to delivery both data and power to PD device. It provides Supper Speed up to 10Gbps and downward compatible with 5-speed 100M/1G/2.5G/5G/10G Ethernet connection ability. It is a cost effective 10Gbps Ethernet speed high power solution for where the power socket are not readily available.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T and IEEE 802.3an 10GBASE-T standard
  • Supports 100M/1G/2.5G/5G/10G 5-Speed Ethernet speed
  • Passive PoE (Compatible to 802.3af/at/bt power level)
  • Provides Passive High Power PoE output ability up to 802.3bt power level
  • Low cable-loss and remote power feeding up to 100 meters
  • Provide Screw Terminal Block and DC In both Power System
  • Over Current Protection and Short-circuit Protection
  • With durable metal case design and supports desktop and wall mounting installation

Hardware Specification

 
Product Proprietary high power POE 10G Injector ( External Type )
Standard IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000Base-T

IEEE 802.3bz 2.5G/5GBASE-T

IEEE 802.3an 10GBASE-T

Passive PoE (Compatible to 802.3af/at/bt power level)

Network Media 100BASE-TX : UTP Cat.5 or up

1000BASE-T: UTP Cat.5e or up

2.5G/5GBASE-T : UTP Cat.5e or up

10GBASE-T : UTP Cat.6a or up

Data Transfer Rate 100M/1G/2.5G/5G/10Gbps (Half-duplex), 200M/2G/5G/10G/20Gbps (Full-duplex)
PoE Type End-span (Type-A): PIN 1/2,3/6

Mid-span (Type-B): PIN 4/5,7/8

Twisted-pair Used 4Pair
Power Interface Input : DC In

Output : RJ45 POE out

Power Requirement External Power Supply ; Input Voltage: 50 ~ 57Volt
Power Supply Optional (60W, 90W)
LED Definition System: Power (Green) x1

l   Light On: Power on

l   Light Off: Power off

Temperature Operating : 0° to 65° C

Storage: -40° to 70° C

Humidity 5% to 90% non-condensing
Dimension ( W x D x H ) NDXG: 130*82*27mm

BTJ-2000: 73*70mm

Weight NDXG: 225g

BTJ-2000: 41g

Case of material Metal
Certifications TBD

** Specifications can be negotiated separately according to needs.