Part Number : NGE

Proprietary passive high power POE Gigabit Injector

PCBA Model : BGJ-1103

Only PCBA Board

Introduction

This Proprietary Passive high power Gigabit PoE Injector compliant with IEEE 802.3af/at standard and compliant with 802.3bt power level. This high power POE Injector is designed to supply operational power to PoE PD devices. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device. It provides Gigabit Ethernet connection ability. It is a cost-effective solution for where the power socket are not readily available.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T standard
  • Supports 10/100/1000M Gigabit Ethernet speed
  • Passive PoE (Compatible to 802.3af/at/bt power level)
  • Provides Passive High Power PoE output ability up to 802.3bt power level
  • Low cable-loss and remote power feeding up to 100 meters
  • Over Current Protection and Short-circuit Protection
  • Supports wall mounting and multiple units combination

Hardware Specification

 
Product Proprietary passive high power POE Gigabit Injector
Standard IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000Base-T

Passive PoE (Compatible to 802.3af/at/bt power level)

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat. 5e or up

Data Transfer Rate 10/100/1000Mbps (Half-duplex),

20/200/2000Mbps (Full-duplex)

PoE Type End-span (Type-A): PIN 1/2,3/6

Mid-span (Type-B): PIN 4/5,7/8

Twisted-pair Used 4Pair
Power Interface Input : DC In

Output : RJ45 POE out

Power Requirement External Power Supply ,

Input Voltage: 50 ~ 57Volt

Power Supply Optional (60W, 90W)
LED Definition System: Power (Green) x1

l  Light On: Power on

l  Light Off: Power off

Temperature Operating : 0° to 55° C ; Storage: -40° to 70° C
Humidity 5% to 90% non-condensing
Dimension

( W x D x H )

NGE : 53.96*41*23mm

BGJ-1103 : 35 *35 mm

Weight NGE : 26g

BGJ-1103 : 13.6g

Case of material ABS
Certifications TBD

** Specifications can be negotiated separately according to needs.