Part Number : NGE

Proprietary 4Pair high power POE Gigabit Injector ( External Type )

PCBA Model : BGJ-1103

Only PCBA Board

Introduction

This proprietary 4Pair high power POE Gigabit Injector compatible with IEEE 802.3af/at/bt power level. It supports the latest High Power Hardware design through 4Pair UTP Ethernet Cable to deliver both data and power to PD devices. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device and provides Gigabit Ethernet connection ability.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T standard.
  • Supports 10/100/1000Mbps Gigabit Ethernet speed.
  • Passive PoE (Compatible to 802.3af/at/bt power level)
  • Provides Passive High Power PoE output ability up to 802.3bt power level.
  • Support PSE / PoE Power Over Ethernet function.
  • Low cable-loss and remote power feeding up to 100 meters.
  • Over Current Protection and Short-circuit Protection.
  • Supports wall mounting and multiple units combination.
  • Plug-and-Play, requires no configuration.

Hardware Specification

 
Product Proprietary 4Pair high power POE Gigabit Injector ( External Type )
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000Base-T

Passive PoE (Compatible to 802.3af/at/bt power level)

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat. 5e or up

Data Transfer Rate 10/100/1000Mbps (Half-duplex),

20/200/2000Mbps (Full-duplex)

PoE Type End-span (Type-A): PIN 1/2,3/6

Mid-span (Type-B): PIN 4/5,7/8

Twisted-pair Used 4Pair
Power Interface Input : DC In

Output : RJ45 POE out

Power Requirement External Power Supply

Input Voltage: 12 ~ 57Volt

Output Voltage : Depends on input voltage

Power Supply Optional
LED Definition System: Power (Green) x1

l  Light On: Power on

l  Light Off: Power off

Temperature Operating : 0° to 55° C ;

Storage: -40° to 70° C

Humidity 5% to 90% non-condensing
Dimension

( W x D x H )

NGE : 53.96*41*23mm

BGJ-1103 : 35 *35 mm

Weight NGE : 29.8g

BGJ-1103 : 17.5g

Case of material ABS
Certifications TBD

** Specifications can be negotiated separately according to needs.