Part Number : NMGT

Proprietary high power POE Multi-Gigabit Injector with STB connector

PCBA Model : BMJ-1006

Only PCBA Board


The Proprietary passive high power POE Multi-Gigabit Injector with STB connector is compliant with IEEE 802.3af/at and 802.3bt power level. With latest High Power Hardware design through 4Pair UTP Ethernet Cable to delivery both data and power to PD device. It provides 1/2.5/5G Multi-Gigabit Ethernet connection ability. It is a cost effective solution for where the power socket are not readily available.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T standard
  • Supports 1/2.5/5G Multi-Gigabit Ethernet speed
  • Passive PoE (Compatible to 802.3af/at/bt power level)
  • Provides Passive High Power PoE output ability up to 802.3bt power level
  • Low cable-loss and remote power feeding up to 100 meters
  • Provide Screw Terminal Block and DC In both Power System
  • Over Current Protection and Short-circuit Protection
  • Supports wall mounting and multiple units combination

Hardware Specification

Product Proprietary high power POE Multi-Gigabit Injector with STB connector
Standard IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000Base-T

IEEE 802.3bz 2.5G/5GBASE-T

Passive PoE (Compatible to 802.3af/at/bt power level)

Network Media 100BASE-TX : UTP Cat.5 or up

1000BASE-T: UTP Cat.5e or up

2.5G/5GBASE-T : UTP Cat.5e or up

Data Transfer Rate 100M/1G/2.5G/5G (Half-duplex),

200M/2G/5G/10G (Full-duplex)

PoE Type End-span (Type-A): PIN 1/2,3/6

Mid-span (Type-B): PIN 4/5,7/8

Twisted-pair Used 4Pair
Power Interface Input : DC In or STB In

Output : RJ45 PoE out

Power Requirement External Power Supply

Input Voltage: 50 ~ 57Volt

Power Supply Optional (60W, 90W)
LED Definition System: Power (Green) x1

l  Light On: Power on

l  Light Off: Power off

Temperature Operating : 0° to 55° C

Storage: -40° to 70° C

Humidity 5% to 90% non-condensing

( W x D x H )

NMGT: 64*51.66*24.07mm

BMJ-1006: 37.2*45mm

Weight NMGT: 44.6g

BMJ-1006: 27.2g

Case of material ABS
Certifications TBD

** Specifications can be negotiated separately according to needs.