Part Number : NPD80

Proprietary high Power POE 12V/19V/24V Gigabit Splitter

PCBA Model : BPL-1513

Only PCBA Board

Introduction

The high power PD Splitter is designed to run Gigabit speed PoE cables over long distances. This device splits the PoE signal into separate data and power sources and relays them into non-PoE devices. Supports DC output voltage 12V, 19V and 24V via DIP switch three range adjustable. It delivers Power over Ethernet (Gigabit Ethernet) to remote devices. This High-Power splitter allows a non-POE compliant device to upgrade to PoE, it is used to deploy remote non-PoE device with no nearby AC outlets brings lots of convenient.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3at PoE+, IEEE 802.3af PoE standards and compatible with IEEE 802.3bt Power level
  • Max Power Output : 80Watt(24V)、75Watt(19V) and 50Watt(12V) when bundle with high power series PoE injectors (NGE/ BGJ-1103)
  • Supports 10/100/1000Mbps Gigabit Ethernet speed
  • DC Output Voltage : 12V / 19V /24V three range adjustable
  • With hardware protection design the device will not cause any damage while changing the voltage output during operation
  • Up to 100 meters (328 feet) application
  • Supports Ethernet PoE to Separate to only Power and only Data output.
  • LED indicators for DC output voltage display of 12V/19V/24V
  • Over Voltage protection and Short Circuit Protection
  • Plug and Play, no software required
  • Supports desktop or wall mounting installation and multiple units combination

Hardware Specification

 
Product Proprietary high Power POE 12V/19V/24V Gigabit Splitter
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3af Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

Compatible to IEEE 802.3bt Power Level

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat.5e or up

Data Transfer Rate 10/100/1000Mbps (Half-duplex),

20/200/2000Mbps (Full-duplex)

Data Pin 1/2, 3/6 & 4/5, 7/8
PoE Type Input : End-span (Type-A): PIN 1/2,3/6 ;

Mid-span (Type-B): PIN 4/5,7/8

Power Interface Input : RJ45 POE in

Output : DC out

Power Requirement 50~57 PoE Power Source
DC Output Voltage 12V/ 19V/ 24V three range adjustable
LED Definition DC Output LED  x3

l DC 12V output: 12V Light on

l DC 19V output: 19V Light on

l DC 24V output: 24V Light on

Temperature Operating : 0° to 55° C ; Storage: -40° to 70° C
Humidity Operating : 10% to 90% non-condensing

Storage: 5% to 90% non-condensing

Dimension

( W x D x H )

NPD80 : 84.48*80*39.5mm

BPL-1513 : 58.89*73mm

Weight NPD80 : 90g

BPL-1513 : 48.4g

Case of material ABS
Certifications TBD

** Specifications can be negotiated separately according to needs.