Model Number : NMG30I

802.3af/at POE Multi-Gigabit Injector ( Internal Type )

Introduction

The NMG30I Multi Gigabit PoE Injector complying with IEEE 802.3af 15.4Watt and 802.3at 30Watt PoE+ standards. It provides DC 56 Volt over Ethernet cables and supports 1/2.5/5Gbps Multi Gigabit Ethernet connection ability. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.

Highlight Features

  •  Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3bz 2.5G/5G BASE-T, IEEE 802.3af PoE and IEEE 802.3at PoE+ standards.
  • Supports 1/2.5/5Gbps Multi Gigabit RJ45 Ethernet Connection.
  • Supports PoE detector function (PoE Detector), LED indicator shows the status of PoE operation (Status).
  • Auto detect PD power supply is powered by End-span (Type-A) or Mid-span (Type-B) power pin then powered to PD device.
  • Provides both data and power for distances of up to 100 meters (328 feet) from the power source when using CAT 5 or up cabling.
  • Internal power design and supports 56V PoE+ output.
  • Max Power : 30Watt (IEEE 802.3at) PoE+.
  • Support PSE / PoE Power Over Ethernet function.
  • Over Current Protection and Short-circuit Protection.
  • Supports Desktop, Wall mounting Units Combination for easy to bundles organize the Ethernet cables.

Hardware Specification

 
Product 802.3af/at POE Multi-Gigabit Injector ( Internal Type )
Main Chip Solution IC+ IP802AR
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3bz 2.5G/5G BASE-T

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet Plus (PoE+)

Network Media 100BASE-TX: UTP Cat.5 or up

1G/2.5G/5GBASE-T : UTP Cat.5e or up

Data Transfer Rate 100M/1G/2.5G/5G (Half-duplex),

200M/2G/5G/10G (Full-duplex)

PoE Type End-span (Type-A): PIN 1/2,3/6

Mid-span (Type-B): PIN 4/5,7/8

Max PoE 30Watt
Power Interface Input : AC In

Output : RJ45 Active PoE+ 56V out

Power Requirement AC Power Code

Input Voltage : 100-240V , 50-60Hz

Power Supply Internal Power Supply
LED Definition Power LED (Green) x1

l  Light On: Power on

l  Light Off: Power off

PoE LED (RJ45) x2

l  End-span : Green

l  Mid-span : Yellow

Temperature Operating : 0° to 50° C

Storage: -40° to 70° C

Humidity 5% to 90% non-condensing
Dimension ( W x D x H ) NMG30I : 155*67.5*34 mm
Weight 181.2g
Case of material PC
Certifications FCC ,CE, RoHs compatible

**Specifications can be negotiated separately according to needs.