Model Name: N1005G-4PD

5 Port POE Gigabit SW with 802.3af/at *4 Port and PD Source Port *1

Introduction
The N1005G-4PD is a powerful and supports IEEE 802.3af/at standard high-performance Gigabit Extender switch provides DC 48~57V Gigabit over Ethernet cables. It also has the ability to pass-through PoE power further downstream to four Powered Devices (PD devices) and the PoE budget is dependent on the PoE source (802.3af or 802.3at) and the PD’s PoE Classification. It is ideal to extend the Ethernet network range beyond 100m, delivering both data and power to network devices such as IP CAM、VOIP Phone with IEEE PoE and Data standards. Moreover, it supports dual power receiving mode POE(PD) In and DC In. User can select either one to supply power or it can choice dual power supply as power backup function for the device. (Power failover). It supports 5 ports 10/100/1000Mbps auto-negotiation function including 4 Ports 10/100/1000M Gigabit port Power over Ethernet (PoE). It’s through RJ45 UTP network is to transmit power and data to meet the requirements.

Highlight Features

5 Ports 10/100/1000Mbps Auto-Negotiation Gigabit Switch, including 1 Port PD + 4 Ports PSE/ PoE Extension function, complying with IEEE 802.3af/at standard
• Supports dual power receiving mode POE(PD) In and DC In. It supports power backup function when use dual power supply (Power Failover)
• Full/Half-Duplex capability on each TX port ,
• Supports Store & Forward architecture and performs forwarding and filtering
• Auto-learning networking configurations
• Supporting the flow control: back pressure for Half-duplex and IEEE 802.3x for Full-duplex mode
• Supports Jumbo Frame 9K
• Non-blocking & Non-head-of-line blocking full-wire speed forwarding
• Supports TP interface Auto MDIX function for auto TX/RX swap
• Automatic Source MAC Address Learning and Aging
• Supports up to 2K MAC addresses
• Up to 1Mb bits buffer
• Support desktop and wall mounting