Model Name: N1008G-4PX

8 Port POE Gigabit SW with 802.3af/at *4 Port

Introduction

The N1008G-4PX is a powerful and IEEE 802.3af/at Power over Ethernet high-performance Gigabit Ethernet switch, with all 8 ports capable of 10/100Mbps or 1000Mbps auto-negotiation operation which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications. Moreover, the 10/100/1000Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 1000Mbps network with no pain. Supports 4 Port 10/100/1000M Gigabit port Power over Ethernet (PoE+), No longer need to worry about the complicated cables and long distance which may cost you a lot of time and money. By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network. Over current protection and circuit shorting protection are also supported to ensure the safety.

Highlight Features

• Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE-802.3af PoE ,IEEE802.3at PoE+
• 8port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch , supports 4 Port Gigabit PSE / PoE+ function, complying with IEEE 802.3af/at standard
• Supporting the power up to 30Watt/15.4Watt/7.5Watt/4Watt for each PSE/PoE ports
• Full/Half-Duplex capability on each TX port ,
• Supports Store & Forward architecture and performs forwarding and filtering
• Auto-learning networking configurations
• Supporting the flow control: back pressure for Half-duplex and IEEE 802.3x for Full-duplex mode
• Support Jumbo Frame 9K
• Non-blocking & Non-head-of-line blocking full-wire speed forwarding
• Supports TP interface Auto MDIX function for auto TX/RX swap
• Automatic Source MAC Address Learning and Aging
• Supports up to 4K MAC addresses
• Up to 1.5M bits buffer
• Desktop and wall mounting available