Model Number : NG30

802.3af/at POE Gigabit Injector

PCBA Model  : ( By Customized )

Only PCBA Board

Introduction

The NG30 Gigabit PoE Injector complying with 802.3af 15.4Watt and 802.3at 30Watt Power Level. Power over Ethernet Injector provides DC 54 Volt over Ethernet cables and 10/100/1000Mbps Gigabit Ethernet connection ability. The Power over Ethernet (POE) adapter is designed to supply operational power to wireless LAN devices such as PoE access point bridges, routers, and surveillance cameras. With Power over Ethernet devices installed, the system administrator only has to use a single RJ-45 Ethernet cable to carry both power and data to each device.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3af PoE , IEEE 802.3at PoE+
  • Supports 10/100/1000M Gigabit RJ45 Ethernet Connection
  • Max PoE: 30Watt (IEEE 802.3at PoE+)
  • Over Current Protection and Short-circuit Protection
  • Supports wall mounting and multiple units combination for easy to bundles organize the Ethernet cables

Hardware Specification

 
Product 802.3af/at POE Gigabit Injector
Standard IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE802.3af Power over Ethernet (PoE)

IEEE802.3at Power over Ethernet Plus (PoE+)

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat. 5 or up

Data Transfer Rate 10/100/1000Mbps (Half-duplex),

20/200/2000Mbps (Full-duplex)

PoE Type Endspan / Type-A (PIN 1/2&3/6)
Max PoE 30Watt
Power Interface Input : AC In

Output : RJ45 PoE out

Power Requirement Internal Power Supply

Input Voltage : 100-240V , 50-60Hz

Output Voltage/Ampere: 54Volt/0.55A

Power Supply Internal Power Supply
LED Definition Power LED (Green) x1

l  Light On: Power on

l  Light Off: Power off

PoE LED (Green) x1

l  Light On: Link Connection af/at mode

l  Light Off: Disconnection / Power off

Temperature Operating : 0° to 40° C

Storage: -40° to 70° C

Humidity 5% to 90% non-condensing
Dimension ( W x D x H ) NG30 : 155*67*33.5 mm
Weight 212g
Case of material ABS
Certifications FCC ,CE, RoHs compatible

**Specifications can be negotiated separately according to needs.