Part Number : NPD04S

802.3af/at POE 12V/19V/24V Splitter

PCBA Model : ( By Customized )

Only PCBA Board

Introduction

The POE Splitter is designed to run Gigabit speed PoE cables over long distances. This device splits the PoE signal into separate data and power sources and relays them into non-PoE devices. Supports DC output voltage 12V, 19V and 24V via DIP switch three range adjustable. Using the PoE Splitter, you can take advantage of Power Over Ethernet and place Fast/Giga Ethernet-enabled products, such as Wireless Access Points Network Cameras, and VoIP Phone where power outlets are not readily available. It delivers Power over Ethernet (Fast Ethernet /Giga Ethernet) to remote devices. The PoE+ Splitter can be used to complement any 802.3at PoE+/802.3af PoE, Proprietary injector unit, or mid-span switch to provide small to medium-sized businesses with a complete end-to-end PoE solution.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3at PoE+, IEEE 802.3af PoE standards
  • PoE (PD) support IEEE 802.3at PoE+, IEEE 802.3af PoE, Max power input support 30Wtt
  • Supports 10/100/1000Mbps Gigabit Ethernet
  • The PoE splitter can use to connect non-PoE IEEE802.3at /802.3af compliant devices to an PoE+ injector or PoE+ switch
  • DC Output Voltage : 12V / 19V /24V three range adjustable
  • With hardware protection design the device will not cause any damage while changing the voltage output during operation
  • Up to 100 meters (328 feet) application
  • Supports Ethernet PoE to Separate to only Power and only Data output.
  • LED indicators for Power function enable and DC output voltage display of 12V/19V/24V
  • Supports to Short-circuit Protection
  • Plug and Play, no software required
  • Supports desktop or wall mounting installation and multiple units combination for easy to bundles organize the Ethernet cables

Hardware Specification

 
Product 802.3af/at POE 12V/19V/24V Splitter
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet Plus (PoE+)

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat. 5 or up

Data Transfer Rate 10/100/1000Mbps (Half-duplex),

20/200/2000Mbps (Full-duplex)

Data Pin PIN 1/2, 3/6 & 4/5, 7/8
PoE Type Input : End-span (Type-A): PIN 1/2,3/6 ;

Mid-span (Type-B): PIN 4/5,7/8

Power Interface RJ45 PD Port : PoE In
Power Requirement 802.3af/at PoE Power Source
DC Output Voltage 12V/ 19V/ 24V three range adjustable
LED Definition DC Output LED  x3

l DC 12V output: 12V Light on

l DC 19V output: 19V Light on

l DC 24V output: 24V Light on

Temperature Operating : 0° to 55° C

Storage: -40° to 70° C

Humidity Operating : 10% to 90% non-condensing

Storage: 5% to 90% non-condensing

Dimension

( W x D x H )

NPD04S : 84.48*80*39.5mm
Case of material ABS
Weight NPD04S : 90g
Certifications TBD

** Specifications can be negotiated separately according to needs.