Model Number : NOSP

POE 10KV Pass-though Gigabit Outdoor Surge Protector

PCBA Model : BSU-1702

Only PCBA Board


The PoE Pass-through Ethernet Outdoor Surge Protector provides superior lightening and surge protection over gigabit networks speeds to provide Gigabit Power-over-Ethernet (PoE) over a single Ethernet cable. It provides durable design featuring a higher surge capability and lower clamping voltage. And the 10 kA Impulse Discharge Current guarantees reliable surge protection. The PoE Pass-through Ethernet Surge Protector can function as a transmitter for a PoE switch to deliver power and data through an Ethernet cable. This device protects all 8 pins and is compatible with all types of RJ45 cables.

Highlight Features

  • Compliant with Pass through for the IEEE 802.3af and IEEE802.3at Device
  • Provides Gigabit transfer speed and Power over Ethernet (PoE) pass through
  • Built in grounding pad which can connect to grounding cable to lower clamping voltage for better and more reliable protection
  • Supports 10/100/1000Mbps Gigabit Ethernet speed
  • Supports 10 kA Impulse Discharge Current
  • Supports 2 protection mode : Line-to-Ground and Line-to-Line
  • IEC/EN 61643-21 (Safety) Initial Pretest Passed
  • IEC/EN 61000-4-5 (EMC) Initial Pretest Passed
  • Regulates power output to avoid damaging the connected device
  • Protects all Eight(8) pins of the Ethernet cable
  • Plug and Play, no software required
  • Aluminum enclosure with IP68 rating waterproof durable design
  • Support wall mounting installation

Hardware Specification

Product POE 10KV Pass-though Gigabit Outdoor Surge Protector
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet Plus (PoE+)

Clamping Line-to-Ground Common mode up to 10 kA
Clamping Line-to-Line Differential mode up to 1 kA
PoE Pass through 8pins all support PoE pass through
Surge Protection Design 10KV
Maximum PoE Operation DC Voltage 57 VDC
Maximum PoE Operation DC Current Two pair : 0.65A (Max)

Four pair : 1.3A (Max)

Temperature Operating : -20° to 70° C

Storage: -30° to 80° C

Humidity 5% to 90% non-condensing

( W x D x H )

NOSP : 102*87.2*58mm

BSU-1702 : 44*73mm

Weight NOSP : 324.6g

BSU-1702 : 50g

Case of material Aluminum
Certifications IEC/EN 61643-21 (Safety) Initial Pretest Passed

IEC/EN 61000-4-5 (EMC) Initial Pretest Passed

**Specifications can be negotiated separately according to needs.