Part Number : NDGT

Active Gigabit Wide Temperature / Wide Voltage to 802.3af/at POE Injector with voltage booster ( External Type )

PCBA Model : BGT-2001

Only PCBA Board

Introduction

The Gigabit Wide Temperature / Wide Voltage 802.3af/at POE Injector with voltage booster supports IEEE 802.3af/at standard and provides 10/100/1000Mbps Gigabit Ethernet connection ability. It supports a wide voltage input range DC 12~56V. It can be booster input voltage to 802.3af/at standard PoE 56V power output to PD device. Moreover, it supports End-span (Type-A) or Mid-span (Type-B) power pin designed, no matter the PD devices is designed Type-A or Type-B all can supply power automatically.

Highlight Features

  • Complying with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3af PoE and IEEE 802.3at PoE+ standards.
  • Supports 10/100/1000M Gigabit RJ45 Ethernet Connection.
  • Supports wide temperature design (-40° ~ 75° C).
  • Supports a wide range input voltages of 12~56V. It can be automatically boosted and converted to a standard PoE 56V power output.
  • Supports PoE detector function (PoE Detector), LED indicator shows the status of PoE operation (Status).
  • Auto detect PD power supply is powered by End-span or Mid-span power pin then powered to PD device.
  • Max Power : 30Watt (IEEE 802.3at) PoE+.
  • Support PSE / PoE Power Over Ethernet function.
  • Provide Screw Terminal Block plug in or DC plug in Interface.
  • Low cable-loss and remote power feeding up to 100 meters.
  • Over Current Protection and Short-circuit Protection.
  • Supports Desktop and wall mounting installation.
  • Plug-and-Play, requires no configuration.

Hardware Specification

 
Product Gigabit Wide Temperature / Wide Voltage to 802.3af/at POE Injector with voltage booster  ( External Type )
Main Chip Solution IC+ IP802AR
Standard IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3af Power over Ethernet (PoE)

IEEE 802.3at Power over Ethernet Plus (PoE+)

Network Media 10BASE –T: UTP Cat. 3 or up

100BASE-TX : UTP Cat. 5 or up

1000BASE-T: UTP Cat. 5 or up

Data Transfer Rate 10/100/1000Mbps (Half-duplex),

20/200/2000Mbps (Full-duplex)

PoE Type End-span (Type-A): PIN 1/2,3/6 ,

Mid-span (Type-B): PIN 4/5,7/8

Power Interface Input : Screw Terminal Block In (for voltage Boost interface ) or DC In

Output : RJ45 Active PoE 56V Out

Power Requirement External Power Supply

Input Voltage: 12 ~ 56Volt only for Screw Terminal Block In

(Wide voltage range)

Input Voltage: 44 ~ 57Volt only for DC In

DC Input Rating 2.5A (Max)
Power Supply Optional
LED Definition Power x1

End-span x1

Mid-span x1

Temperature Operating : -40° to 75° C ,

Storage: -40° to 85° C

Humidity 5% to 90% non-condensing
Dimension ( W x D x H ) NDGT : 130*82*27mm

BGT-2001 : 73*70mm

Weight NDGT : 251.8g ; BGT-2001 : 59.4g
Case of material Metal
Certifications TBD

** Specifications can be negotiated separately according to needs.